If you're an Audi Q5 or SQ5 owner in Canada, you already know how brutal winter mornings can be. Scraping a frozen windshield while your leather seats feel like a block of ice is nobody's idea of a great start. The good news: adding remote start to your 2018–2024 Audi Q5 or SQ5 is entirely possible — no dealer visit, no permanent wiring modifications, and no voiding your warranty.
Here's everything you need to know.
Is the 2018–2024 Audi Q5 / SQ5 Compatible with Remote Start?
Yes. Our plug-and-play remote start kit is compatible with:
- 2018, 2019, 2020, 2021, 2022, 2023, 2024 Audi Q5 and SQ5
- Push-to-Start (PTS) ignition ✓
- Automatic transmission ✓
- Gas engine ✓
What's Included in the Kit
The kit uses a 100% plug-and-play T-Harness that connects directly to your Q5's Body Control Module (BCM) in the trunk — no wire splicing, no cutting, no permanent modifications.
Choose your remote option:
| Option | Price | What You Get |
|---|---|---|
| OEM FOB | $449 CAD | Use your existing Audi key fob to remote start |
| 2-Way LED Remote | $599 CAD | Dedicated long-range 2-way remote with confirmation |
How Does It Work? (3xLock Start)
Once installed, starting your Q5 is simple:
- Press the Lock button on your OEM Audi fob 3 times — the engine starts
- Hazard lights flash to confirm the engine is running
- The engine runs for 15 minutes, giving your cabin and engine plenty of time to warm up (or cool down in summer)
- Takeover mode: When you open the door and press the brake, the engine stays running — no interruption to your drive
What You'll Need for Installation
Before you begin, have these on hand:
- Two Audi Q5 keys — one key will remain stored inside the vehicle permanently as part of the bypass system; the other is used for programming and then returned to normal use
- Basic hand tools (trim removal tools recommended for a clean install)
- 30–60 minutes of your time
The T-Harness connects at the trunk BCM location, making this one of the cleaner installs in the Audi lineup. No dashboard disassembly required.
Step-by-Step Installation Overview
- Gather your two keys and park in a safe, well-lit area
- Access the trunk BCM — remove the trunk liner panel to expose the BCM.
- Plug in the T-Harness — connect the harness between the BCM and the factory connector (no splicing)
- Store Key #1 in the provided box inside the vehicle
- Run the programming sequence using Key #2 following the included guide
- Test: Lock → Lock → Lock with your OEM fob and confirm the engine starts
Frequently Asked Questions
Will this void my Audi warranty?
No. Because the kit is 100% plug-and-play with no wire cutting or permanent modifications, it does not void your factory warranty.
Do I need a new remote, or can I use my existing Audi fob?
The OEM FOB option lets you use your existing Audi key fob — just triple-press Lock. If you want a dedicated long-range remote with 2-way confirmation, choose the 2-Way LED option.
How cold is too cold? Will it work in a Canadian winter?
This system is designed for Canadian winters. The 15-minute run time is more than enough to warm the engine, defrost the windshield, and heat the cabin before you get in.
Does it work with diesel or hybrid Q5 models?
This specific kit is designed for gas engine, automatic transmission Q5s. If you have a diesel model just leave the vehicle information at checkout.
What if I sell my vehicle?
The T-Harness unplugs completely. Remove it in minutes and leave no trace — or transfer it to your next vehicle if compatible.
Ready to Stay Warm This Winter?
Stop dreaming about a warm car on cold mornings. Our plug-and-play kit ships fast across Canada and installs in an hour.
Shop the Plug & Play Remote Start for 2018–2024 Audi Q5 / SQ5 →
At checkout, provide your vehicle's year, ignition type (Push-to-Start), fuel type (Gas or Diesel), and transmission (Automatic) to confirm fitment before your order ships.
